圓密耳
Template:NoteTA Template:Infobox unit 圓密耳(英文:circular mil)是一種面積單位,又稱圓密爾,等於一個直徑爲 1 密耳(千分之一英寸)的圓的面積,相當於Template:Val。這個單位的制定和具有圓形截面的電線有關,使用這個單位可以避開圓周率的計算,這使得橫截面積和其直徑的對應轉換變得十分容易。
在美國和加拿大使用的Template:Le(National Electrical Code, NEC)中使用圓密耳定義比4/0 AWG(直徑0.46英寸,即11.684mm的電線)粗的導線尺寸。粗電纜通常使用千圓密耳作單位,有MCM和kcmil兩種縮寫方式。除了北美及中美洲,日本、南韓及台灣均採用等效於NEC的電氣規範。世界上其他國家均採用国际电工委员会(IEC)標準,以mm2為單位,標準值採用IEC 60228。
- 1 圓密耳 = π/4 方密耳 ≈ 0.785398 方密耳
- 1 方密耳 = 4/π 圓密耳 ≈ 1.273240 圓密耳
標準尺寸
在美國國家電工標準(NEC)的電線標準中,250至400MCM,每級增大50MCM,400至1000時,每級增大100,1000至2000時,每級增大250。[1]
下表展示的直徑基於實心導體計算。如果採用絞合導體,直徑則會較大,視乎使用多少根幼導線緊壓成一條電纜。
| 截面體 | 直徑 | 銅線載流量 (A) 60/75/90 °C 導體溫度[2] | ||||
|---|---|---|---|---|---|---|
| (kcmil, MCM) |
(mm2) | (in) | (mm) | |||
| 250 | 126.7 | 0.500 | 12.70 | 215 | 255 | 290 |
| 300 | 152.0 | 0.548 | 13.91 | 240 | 285 | 320 |
| 350 | 177.3 | 0.592 | 15.03 | 260 | 310 | 350 |
| 400 | 202.7 | 0.632 | 16.06 | 280 | 335 | 380 |
| 500 | 253.4 | 0.707 | 17.96 | 320 | 380 | 430 |
| 600 | 304.0 | 0.775 | 19.67 | 355 | 420 | 475 |
| 700 | 354.7 | 0.837 | 21.25 | 385 | 460 | 520 |
| 750 | 380.0 | 0.866 | 22.00 | 400 | 475 | 535 |
| 800 | 405.4 | 0.894 | 22.72 | 410 | 490 | 555 |
| 900 | 456.0 | 0.949 | 24.10 | 435 | 520 | 585 |
| 1000 | 506.7 | 1.000 | 25.40 | 455 | 545 | 615 |
| 1250 | 633.4 | 1.118 | 28.40 | 495 | 590 | 665 |
| 1500 | 760.1 | 1.225 | 31.11 | 520 | 625 | 705 |
| 1750 | 886.7 | 1.323 | 33.60 | 545 | 650 | 735 |
| 2000 | 1013.4 | 1.414 | 35.92 | 560 | 665 | 750 |
其他較細的電線採用美国线规(AWG)。
參考資料
- ↑ NFPA 70-2011 National Electrical Code 2011 Edition Template:Webarchive. Table 310.15(B)(17) page 70-155, Allowable Ampacities of Single-Insulated Conductors Rated Up to and Including 2000 Volts in Free Air, Based on Ambient Air Temperature of 30°C (86°F).
- ↑ NFPA 70 National Electrical Code 2008 Edition Template:Webarchive. Table 310.16 page 70-148, Allowable ampacities of insulated conductors rated 0 through 2000 volts, 60°C through 90°C, not more than three current-carrying conductors in raceway, cable, or earth (directly buried) based on ambient temperature of 30°C. Extracts from NFPA 70 do not represent the full position of NFPA and the original complete Code must be consulted. In particular, the maximum permissible overcurrent protection devices may set a lower limit.