查看“︁国际标准大气”︁的源代码
←
国际标准大气
跳转到导航
跳转到搜索
因为以下原因,您没有权限编辑该页面:
您请求的操作仅限属于该用户组的用户执行:
用户
您可以查看和复制此页面的源代码。
'''国际标准大气'''( '''ISA''' ) 是一个静止大气模型,用于描述[[地球大气层|地球大气]]的[[压强|压力]]、[[温度]]、[[密度]]和[[黏度|粘度]]如何在广泛的[[海拔|高度]]范围内变化。它的建立是为了提供大气温度和压力的通用参考。模型由不同高度的数值表以及导出这些值的公式组成。[[國際標準化組織|国际标准化组织]](ISO) 将国际标准大气作为[[國際標準|国际标准]]发布,即 ISO 2533:1975。 <ref name="ISO 1975">[[International Organization for Standardization]], ''[http://www.iso.org/iso/en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=7472&ICS1=49&ICS2=20&ICS3= Standard Atmosphere] {{Wayback|url=http://www.iso.org/iso/en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=7472&ICS1=49&ICS2=20&ICS3= |date=20030913053514 }}'', ISO 2533:1975, 1975.</ref>其他[[標準組織|标准组织]],例如[[国际民用航空组织]](ICAO) 和[[美國聯邦政府|美国政府]],在其自己的标准制定机构下发布相同大气模型的扩展或子集。 == 描述 == 国际标准大气[[数学模型]]将大气划分为多个层,假设每一层中[[热力学温度|绝对温度]]''T''与[[位势高度]]''h''呈线性变化。 <ref name="Graham Gyatt">Gyatt, Graham (2006-01-14): [http://www.atmosculator.com/The%20Standard%20Atmosphere.html "The Standard Atmosphere"] {{Webarchive|url=https://web.archive.org/web/20070310223946/http://www.atmosculator.com/The%20Standard%20Atmosphere.html|date=2007-03-10}}. A mathematical model of the 1976 U.S. Standard Atmosphere.</ref>其他两个值(压力''P''和密度''ρ'' )通过同时求解以下方程得到: * 由[[流體靜力平衡|流体静力平衡]]产生的垂直压力梯度,它与压力变化率与位势高度相关: :: <math>\frac{dP}{dh} = - \rho g </math> , 和 * [[理想气体状态方程|理想气体定律]],它与[[压强|压力]]、[[密度]]和[[温度]]有关: :: <math>\ P = \rho R_{\rm specific}T </math> 在每个位势高度,其中''g''是标准[[標準重力|重力加速度]], ''R'' <sub>specific</sub>是干燥空气的[[氣體常數|比气体常数]](287.058J⋅kg <sup>-1</sup> ⋅K <sup>-1</sup> )。 这样就可以解出每个高度的大气密度和压强,[[黏度|动力粘度]]是温度的经验函数,[[黏度|运动粘度]]是通过将动力粘度除以密度来计算的。 综上,该标准包括一个不同海拔高度的大气参数列表,及其推导公式。为了适应低地,模型从''低于海平面610米'',标准温度设置为 19 摄氏度。温度[[氣溫垂直遞減率|递减率为]]-6.5°C每公里(大约 -2°C每 1,000ft),到标准平均海平面温度{{Convert|15|C|F}}, 压强{{Convert|101325|Pa|psi}}(1 [[标准大气压|atm]] ) 压力,密度为1.225千克每立方米 。[[对流层]]向上延续到11公里(36089ft)高, 温度降至{{Convert|−56.5|C|F}} ,气压为{{Convert|22632|Pa|psi}}, 密度为0.3639千克每立方米 。 高度从11 公里到20 公里之间,大气温度保持不变。 <ref name="aeromech.usyd.edu.au">{{Cite web|title=Properties of the Atmosphere|url=http://www.aeromech.usyd.edu.au/aero/atmosphere/|access-date=2008-03-13|author=Auld|date=2008|first=D.J.|archive-url=https://web.archive.org/web/20130609091708/http://www.aeromech.usyd.edu.au/aero/atmosphere/|archive-date=2013-06-09}}</ref> <ref name="Batchelor 1967">Batchelor, G. K., ''An Introduction to Fluid Dynamics'', Cambridge Univ. Press, 1967.</ref> {| class="wikitable" |+1976标准大气中的大气分层 !层 !名称 !层底位势高度<br>''h''(m) !层底几何高度<br>''z''(m) !气温递减率<br>''λ''(°C/km) !层底温度<br>''T''(°C) !层底气压<br>''P''(Pa) !层底大气密度<br>''ρ'' (kg/m<sup>3</sup>) |- | align="center" | 0 | align="center" |[[对流层]] | align="center" | -610 | align="center" | -611 | align="center" | +6.5 | align="center" | +19.0 | align="center" | 108,900 (1.075 大气压) | align="center" | 1.2985 |- | align="center" | 1 | align="center" |[[對流層頂|对流层顶]] | align="center" |11,000 | align="center" | 11,019 | align="center" | 0.0 | align="center" | −56.5 | align="center" | 22,632 | align="center" | 0.3639 |- | align="center" | 2 | align="center" |[[平流层]] | align="center" |20,000 | align="center" | 20,063 | align="center" | -1.0 | align="center" | −56.5 | align="center" | 5474.9 | align="center" | 0.0880 |- | align="center" | 3 | align="center" |[[平流层]] | align="center" |32,000 | align="center" | 32,162 | align="center" | -2.8 | align="center" | −44.5 | align="center" | 868.02 | align="center" | 0.0132 |- | align="center" | 4 | align="center" |平流层顶 | align="center" |47,000 | align="center" | 47,350 | align="center" | 0.0 | align="center" | -2.5 | align="center" | 110.91 | align="center" | 0.0020 |- | align="center" | 5 | align="center" |[[中间层]] | align="center" |51,000 | align="center" | 51,413 | align="center" | +2.8 | align="center" | -2.5 | align="center" | 66.939 | align="center" | |- | align="center" | 6 | align="center" |[[中间层]] | align="center" |71,000 | align="center" | 71,802 | align="center" | +2.0 | align="center" | −58.5 | align="center" | 3.9564 | align="center" | |- | align="center" | 7 | align="center" |中间层顶 | align="center" |84,852 | align="center" | 86,000 | align="center" | — | align="center" | −86.28 | align="center" | 0.3734 | align="center" | |} : 气温递减率''λ''是每千米位势高度气温的降低数值。 上表中,''[[位势高度]]''是考虑了重力随高度变化计算得出的,而''几何高度''是[[海平面|平均海平面]]以上的垂直距离(MSL)。 <ref name="Graham Gyatt">Gyatt, Graham (2006-01-14): [http://www.atmosculator.com/The%20Standard%20Atmosphere.html "The Standard Atmosphere"] {{Webarchive|url=https://web.archive.org/web/20070310223946/http://www.atmosculator.com/The%20Standard%20Atmosphere.html|date=2007-03-10}}. A mathematical model of the 1976 U.S. Standard Atmosphere.</ref>请注意,上表中气温递减率''λ''以位势高度给出,而不是几何高度。 国际标准大气模型基于国际标准化组织的 TC 20/SC 6 技术会议确定的中纬度地区的平均条件。该条件20 世纪中叶以来,进行过数次修订。 === 非标准条件 === 标准大气模型假设了一个标准状况,来为计算和测试不同海拔高度的发动机和载具性能提供可重复的工程参考。该模型''不''提供实际大气条件的严格气象模型(例如,[[伯努利定律|由于风条件引起的气压变化]])。它也没有考虑[[湿度]]影响。空气被假定为干燥、清洁且化学成分恒定。在从标准大气模型获得大气状态后,通过在干空气中添加水蒸气,就得到了考虑湿度的接近真实的模型。 非标准(热或冷)条件是通过将指定的温度偏移量添加到标准温度来模拟的,但将压力采用标准值。使用理想气体状态方程在新的温度和压力下重新计算密度和粘度。热天、冷天、热带和极地温度曲线已被定义为用作性能参考,例如[[美国国防部]]MIL-STD-210C 及其后继 MIL-HDBK-310。 <ref>{{Cite web |url=http://www.mathworks.com/help/aerotbx/ug/atmosnonstd.html?s_tid=gn_loc_drop |title=Mathworks atmosnonstd |access-date=2022-06-08 |archive-date=2021-05-13 |archive-url=https://web.archive.org/web/20210513214702/https://www.mathworks.com/help/aerotbx/ug/atmosnonstd.html?s_tid=gn_loc_drop }}</ref> == 国际民航标准大气 == 国际民用航空组织 (ICAO) 于 1993 年以 Doc 7488-CD 号文件发布了的“ICAO 标准大气”。它具有与国际标准大气的模型是相同的,但将高度覆盖范围扩展到 80 公里(262,500 英尺)。 <ref name="ICAO 1993">{{Cite book|publisher=[[International Civil Aviation Organization]]|title=Manual of the ICAO Standard Atmosphere (extended to 80 kilometres (262 500 feet))|id=Doc 7488-CD|edition=Third|year=1993|isbn=92-9194-004-6}}</ref> 国际民航组织标准大气与 ISA 一样,不含水蒸气。 航空标准和飞行规则以国际标准大气为基础。空速指示器的校准假设它们在国际标准大气的海平面上运行,空气密度为 1.225 公斤/米<sup>3</sup> 。 == 参考 == {{Reflist|2}} * {{Cite book|last=Davies|first=Mark|title=The Standard Handbook for Aeronautical and Astronautical Engineers|publisher=McGraw-Hill|location=New York|date=2003|isbn=0-07-136229-0}} * [https://web.archive.org/web/20080630023615/http://mtp.jpl.nasa.gov/notes/altitude/ReferenceAtmospheres.html NASA JPL Reference Notes] * ICAO, ''Manual of the ICAO Standard Atmosphere (extended to 80 kilometres (262 500 feet))'', Doc 7488-CD, Third Edition, 1993, {{ISBN|92-9194-004-6}}. * {{Cite web|title=ICAO标准大气手册(英法俄西)|url=https://web.archive.org/web/*/http://www.aviationchief.com:80/uploads/9/2/0/9/92098238/icao_doc_7488_-_manual_of_icao_standard_atmosphere_-_3rd_edition_-_1994.pdf|access-date=2021-05-07|author=ICAO|date=1994|format=PDF|publisher=ICAO|language=英法俄西}} [[Category:ISO標準]] [[Category:大气]]
该页面使用的模板:
Template:Cite book
(
查看源代码
)
Template:Cite web
(
查看源代码
)
Template:Convert
(
查看源代码
)
Template:ISBN
(
查看源代码
)
Template:Reflist
(
查看源代码
)
Template:Wayback
(
查看源代码
)
Template:Webarchive
(
查看源代码
)
返回
国际标准大气
。
导航菜单
个人工具
登录
命名空间
页面
讨论
不转换
查看
阅读
查看源代码
查看历史
更多
搜索
导航
首页
最近更改
随机页面
MediaWiki帮助
特殊页面
工具
链入页面
相关更改
页面信息